The characteristics of the hot dipped plastic steel pipe have the following characteristics
With the continuous development of electric power, information industry and national economy, environmental protection is attracting more and more attention. Cable access has been widely promoted in urban power grid construction, communication pipeline construction and transformation. Hot dip tube power, is the introduction of foreign advanced technology and technology R & D and production of a new type of green pipeline, and electrical equipment of electric power industry of China Quality Inspection and test center testing report issued by the certificate, the product meets the requirements for the installation of GB/T13381.1-1992 electrical conduit, general requirements standard. The internal and external anticorrosive coating can be made of FPE polyethylene powder and epoxy resin powder. After special technology, the plastic layer is melted with the inner and outer wall of the steel tube at high temperature, which has strong adhesion with the steel tube, and the surface of the coating is smooth and beautiful.
Hot dip power steel has the advantages of a steel pipe and a plastic pipe in a body, has the properties of anti aging resistance and corrosion resistance strong, high mechanical strength, strong bearing force, weatherability, excellent insulation performance, both inside and outside the smooth surface, small friction coefficient, low water absorption, adapt to the characteristics of wide range of temperature, which is a new generation of the best product upgrading of traditional cable threading tube. The pluggable connection mode used in the cable protection pipe is reasonable, fast connecting, simple and safe and economical and practical.
Coating materials: FPE polyenene, modified polyethylene, epoxy resin
General color: black and gray
The thickness of the coating: coating more than 0.5mm coating is more than 0.6mm
Coating method: dip coating
Product specification: DN50-DN300
Connection mode: expansion, size head socket connection
Application: electric power communication, municipal reform, bridge and tunnel etc.
Tube wall thickness: 2mm, 2.5mm, 2.75mm, 3.0mm, 3.25mm, 3.5mm, 3.75mm, 4.0mm, 4.5mm, 5mm, 6mm, etc.
Single length: 3M, 4m, 5m, 6m or custom-made length according to customer requirements
Pipe interface: expanding the size of the head socket connection, convenient and quick.
Use temperature: -40 C -90 degrees C for a long time.
Hot dip power tube has the following characteristics: 1, high strength; 2, no electric insulation corrosion; 3, flame retardant, good heat resistance; 4, smooth wall, do not scratch the cable; 5, socket type connection, convenient construction; 6, light weight, installation is simple and convenient, two people will be on the spot the implementation of installation; 7, the use of a wide range of application: cable laying underground for protection tube, also used in cable bridge to cross the river and of high demand.